23 / 12 viewing items.
,With a maximum cutting depth of 18 mm (0.709 inch) and high feed per tooth, CoroMill® 360 provides a productivity boost that is tough to beat, with minimum risk for failure and machine downtime.
Benefits
Same tool body can use two different cassette types for inserts with IC 19 mm (0.748 inch) and IC 28 mm (1.102 inch)
Exchangeable in...
Learn More
CoroMill® 357 is a multi-edge face milling cutter for roughing and cubing in mainly steel and cast iron. It has a secure and strong cutter body design with shim-protected tip seats and a clamping system that offers quick and easy insert indexing.
Benefits
High metal removal rate
Low downtime thanks to inserts that are easy to index and chan...
Learn More
Milling cutters for high metal removal and mirror finish. The cutter is designed with enhanced corners to reduce burr formation and frittering of the component.
Benefits
Easy to use and highly productive
Light cutting with low power consumption
Close tolerance combined with the wiper insert for superior surface finish
Wide range of grades an...
Learn More
CoroMill® 200 is a very stable rougher and a versatile tool. It is a good choice for general milling, as well as for die- and mold-making, and should be the First choice for roughing operations. Strong cutting edges make the cutter resistant to tough conditions with interruptions (holes, gaps, etc.) and/or abrasive scale (skin).
Benefits
P...
Learn More
Face milling
Roughing to finishing
Maximum depth of cut 6 mm (0.236 inch)
P
Steel
M
Stainless steel
K
Cast iron
S
Heat resistant super alloys
H
Hardened materials...
Learn More
Milling cutters for high metal removal and mirror finish. The cutter is designed with enhanced corners to reduce burr formation and frittering of the component.
Benefits
Easy to use and highly productive
Light cutting with low power consumption
Close tolerance combined with the wiper insert for superior surface finish
Wide range of grades an...
Learn More
Grooving
Parting off
Double half side milling
Shoulder milling
Face milling
Back face milling
Gang milling
Circular interpolation
P
Steel
M
Stainless steel
K
Cast iron
S
Heat resistant super alloys
H
Hardened materials
N
Non-ferrous metals...
Learn More
General and repeated shoulder milling
Face milling
Edging
Plunge milling
Slot milling
Roughing to finishing
P
Steel
M
Stainless steel
K
Cast iron
S
Heat resistant super alloys
H
Hardened materials
N
Non-ferrous metals...
Learn More
The CoroMill® 210 is a very productive roughing concept to use when high metal removal rate is the first priority. A 10° entering angle allows for extreme feed rates when face milling. This directs the cutting forces in an axial direction, which provides a stable cutting action and no vibration tendency.
Benefits
High table feed due to the ...
Learn More
High feed rough face milling and pocketing
Ramping capacity
Diameter: 13–32 mm (0.5–1.25 inches)
IC05: ap max 0.85 mm (0.034 inch)
IC07: ap max 1.2 mm (0.047 inch)
P
Steel
M
Stainless steel
S
Heat resistant super alloys
H
Hardened materials...
Learn More
CoroMill® 419 is a high-feed milling concept with five edges for roughing to semi-finishing. It offers excellent performance in many material groups and has great potential for optimization. The high feed and light cutting action enable a soft sound, creating an operator-friendly environment.
Benefits
High productivity in applications requiri...
Learn More
CoroMill® 200 is a very stable rougher and a versatile tool. It is a good choice for general milling, as well as for die- and mold-making, and should be the First choice for roughing operations. Strong cutting edges make the cutter resistant to tough conditions with interruptions (holes, gaps, etc.) and/or abrasive scale (skin).
Benefits
P...
Learn More