13 / 12 viewing items.
,
Face milling
Roughing to finishing
Maximum depth of cut 6 mm (0.236 inch)
P
Steel
M
Stainless steel
K
Cast iron
S
Heat resistant super alloys
H
Hardened materials...
Learn More
Milling cutters for high metal removal and mirror finish. The cutter is designed with enhanced corners to reduce burr formation and frittering of the component.
Benefits
Easy to use and highly productive
Light cutting with low power consumption
Close tolerance combined with the wiper insert for superior surface finish
Wide range of grades an...
Learn More
Grooving
Parting off
Double half side milling
Shoulder milling
Face milling
Back face milling
Gang milling
Circular interpolation
P
Steel
M
Stainless steel
K
Cast iron
S
Heat resistant super alloys
H
Hardened materials
N
Non-ferrous metals...
Learn More
General and repeated shoulder milling
Face milling
Edging
Plunge milling
Slot milling
Roughing to finishing
P
Steel
M
Stainless steel
K
Cast iron
S
Heat resistant super alloys
H
Hardened materials
N
Non-ferrous metals...
Learn More
The CoroMill® 210 is a very productive roughing concept to use when high metal removal rate is the first priority. A 10° entering angle allows for extreme feed rates when face milling. This directs the cutting forces in an axial direction, which provides a stable cutting action and no vibration tendency.
Benefits
High table feed due to the ...
Learn More
High feed rough face milling and pocketing
Ramping capacity
Diameter: 13–32 mm (0.5–1.25 inches)
IC05: ap max 0.85 mm (0.034 inch)
IC07: ap max 1.2 mm (0.047 inch)
P
Steel
M
Stainless steel
S
Heat resistant super alloys
H
Hardened materials...
Learn More
CoroMill® 419 is a high-feed milling concept with five edges for roughing to semi-finishing. It offers excellent performance in many material groups and has great potential for optimization. The high feed and light cutting action enable a soft sound, creating an operator-friendly environment.
Benefits
High productivity in applications requiri...
Learn More
CoroMill® 200 is a very stable rougher and a versatile tool. It is a good choice for general milling, as well as for die- and mold-making, and should be the First choice for roughing operations. Strong cutting edges make the cutter resistant to tough conditions with interruptions (holes, gaps, etc.) and/or abrasive scale (skin).
Benefits
P...
Learn More
CoroMill® 300 is a round insert cutter for a broad range of operations such as face milling, pocketing, and profiling. Its light cutting action allows for smooth entries and exits and for use of extended tool set-ups.
The cutters generate low cutting forces and little heat when machining with small depths of cut. This allows the table feed to be i...
Learn More
CoroMill® S-60 is a close-pitch cutter for machining in cast iron. The close pitch and high number of cutting edges increase productivity and reduce costs.
Benefits
Close and extra-close pitch cutters for great productivity and long tool life
Low production costs
Short setup time
Wiper option for brilliant surface finish
Easy to handle...
Learn More
Extra close pitch face milling cutter primarily intended for roughing and semi-finishing of cast iron components.
Benefits
Spring-loaded insert for quick and easy insert indexing
High-productive auto roughing cutter
Strong triangular insert
Features
Large number of inserts
45 degree face mill
High table feeds provide...
Learn More
CoroMill® 365 is the essential tool for rough to semi-finish face milling of cast iron and steel components. Use the tool for large series production and applications where high metal removal rate is critical.
Benefits
Inserts with the ability to machine down to AP = 6 mm (0.236 inch)
Unique design with eight true cutting edges for hi...
Learn More