General and repeated shoulder milling Face milling Edging Plunge milling Slot milling Roughing to finishing P Steel M Stainless steel K Cast iron S Heat resistant super alloys H Hardened materials N Non-ferrous metals...

Learn More

Diameter: 9.7–200 mm (0.375–8.000 inches)Max cutting depth: 15.7 mm (0.618 inch) Shoulder milling Repeated shoulder milling Linear and helical ramping Turn milling Deep shoulder milling Edging Pocketing P Steel M Stainless steel K Cast iron S Heat resistant super alloys H Hardened materials N Non-ferrous metals...

Learn More

Grooving Parting off Double half side milling Shoulder milling Face milling Back face milling Gang milling Circular interpolation P Steel M Stainless steel K Cast iron S Heat resistant super alloys H Hardened materials N Non-ferrous metals...

Learn More

The CoroMill® 790 cutter is the first choice for ISO N materials. To be used in shoulder operations as a "super remover," it is designed for high security demands and high-precision work.   Benefits High speed machining performance with high security Extreme metal removal rates Very small tool run-out   Features Open insert location f...

Learn More

The CoroMill® 316 system offers milling solutions for high feed face milling, slot milling, helical interpolation, shoulder milling, profile milling, and chamfer milling of components in various material groups from ISO P to ISO S. The exchangeable milling heads allow you to quickly, easily, and accurately switch between various operations. The end...

Learn More

CoroMill® Plura is a range of high-quality solid carbide end mills that offer productive, efficient, and perfectly reliable milling solutions. Featuring tools for heavy roughing, finishing, and thread milling, CoroMill® Plura works in various applications and materials, including difficult-to-cut materials and very hard steels up to 63 HRc....

Learn More

Diameter: 9.7–200 mm (0.375–8.000 inches)Max cutting depth: 15.7 mm (0.618 inch) Shoulder milling Repeated shoulder milling Linear and helical ramping Turn milling Deep shoulder milling Edging Pocketing P Steel M Stainless steel K Cast iron S Heat resistant super alloys H Hardened materials N Non-ferrous metals...

Learn More

CoroMill® 690 is developed specifically for high-productivity 2D profile milling of titanium components. Inserts are securely fastened by iLock technology. By equipping every insert pocket with threaded coolant holes with nozzles for high pressure coolant delivery, you can apply maximum coolant where required.   Benefits High-productivity mill...

Learn More

Finishing External and internal machining Wet and dry machining ae 0.5 to 1.5 mm (max.) ae 1.0 mm recommended ae 1.5 mm for pre-machining Recommended hex = 0.05 to 0.1 mm Exact calculation of fz (depending from DC and ae) is necessary Ra 0.6 to 1.2 µm in average P Steel M Stainless steel K Cast iron S Heat ...

Learn More

Diameter: 9.7–200 mm (0.375–8.000 inches)Max cutting depth: 15.7 mm (0.618 inch) Shoulder milling Repeated shoulder milling Linear and helical ramping Turn milling Deep shoulder milling Edging Pocketing P Steel M Stainless steel K Cast iron S Heat resistant super alloys H Hardened materials N Non-ferrous metals...

Learn More

Many components and machine tools require long tool assemblies to reach down in large components. Vibration risk is high and the remedy is either slow machining or dampened tools. With Silent Tools, chatter and vibration are eliminated, the machining rate can be increased, and process security improved.   Benefits Productivity gains of at lea...

Learn More

Modular system for small diameters The modular system Coromant EH enables you to get the most out of your cutting edge. Get the required reach and accessibility with shanks and modular adapters. In short overhang applications, it can be possible to increase your productivity with integrated machine adapters.The modularity eliminates the need for a...

Learn More